+91-22-2545 0718/ 19 info@enercare.in
Pumping clean or aggressive liquids not chemically or mechanically aggressive to the pump materials in water supply systems, cooling water circuits, swimming pools, fire-fighting systems, irrigation systems, drainage systems, heating systems, air-conditioning systems, spray irrigation systems
Single-stage close-coupled volute casing pump, with ratings to EN 733, with replaceable shaft sleeve and casing wear rings, with motor-mounted variable speed system. With KSB SuPremE, a magnetless synchronous reluctance motor of efficiency class IE4/IE5 to IEC TS 60034-30-2:2016, for operation with the KSB PumpDrive 2 or KSB PumpDrive 2 Eco variable speed system without rotor position sensors. Motor mounting points in accordance with EN 50347, envelope dimensions in accordance with DIN V 42673 (07-2011). ATEX-compliant version available.
| Breweries | Building services |
| Cooling water and condensate | Energy |
| Fire fighting and sprinkler systems | Food and beverages |
| HVAC | Heat transfer, Cooling circuits |
| Heating / ventilation / air-condition | Industrial waste water |
| Industry engineering | Irrigation |
| Municipal waste water | Power Stations > 100 MW |
| Process | Special processes |
| Steel | Suspended solids treatment |
| Swimming pools | Waste water |
| Water | Water supply |
| Water transport |
| Q (50Hz) | 1.5 – 716.0 (m³/h) |
| H (50Hz) | 2.0 – 144.0 (m) |
| Casing partition | Radially split |
| Drive frequency | 50 Hz /60 Hz |
| Type of drive | Electric motor |
| Drive voltage | Low voltage |
| No. of impeller entries | Single entry |
| Impeller material (EN standard) | 1.4408 / A743CF8M, CC480K-GS / B30C90700, JL 1040 / A48CL35 |
| Type of installation | Close-coupled |
| Type of coupling | Direct |
| Max. permissible fluid temperature | 140.0 (°C) |
| Guaranteed to be silicon-free | Yes |
| Nozzle position | End suction |
| Maximum operating pressure | PN 16 |
| Pull-out design | Yes |
| Pump set location | Dry installed |
| Shaft material (EN standard) | 1.4571, C45+N |
| Suction characteristics | Non-priming |
| Suitable for drinking water | Yes |
| Type of casing | Volute casing |
| Type of impeller | Closed / Radial |
| Type of connection | Flange |
| Casing material (EN standard) | 1.4408 / A743GRCF8M, CC480K-GS/B30 C90700, JL 1040 / A48CL35B, JS 1030 / A536 GR 60-40-18 |
| eClass assignment | 36410000, 36410100, 36410101 |
| Installation position | Horizontal or vertical |
| Shaft seal type | Mechanical seal |
| Main applications | Building services, Water, Energy, Industry and process engineering |
| Casing material | Cast iron, Stainless steel, Nodular cast iron, Bronze |
| Maximum discharge-side pressure | 16.0 (bar) |
| Maximum drive rating | 55.0 (kW) |
| Type of installation | Stationary |
| Maximum speed of rotation | 3500.0 (1/min) |
