+91-22-2545 0718/ 19 info@enercare.in
Hot water heating, cooling circuits, air-conditioning, water supply systems, service water supply systems, industrial recirculation systems.
Single-stage volute casing pump in in-line design, with magnetless KSB SuPremE motor of efficiency class IE4/IE5 and PumpDrive variable speed system; pump shaft and motor shaft are rigidly connected. With KSB SuPremE, a magnetless synchronous reluctance motor of efficiency class IE4/IE5 to IEC TS 60034-30-2:2016, for operation with the KSB PumpDrive 2 or KSB PumpDrive 2 Eco variable speed system without rotor position sensors. Motor mounting points in accordance with EN 50347, envelope dimensions in accordance with DIN V 42673 (07-2011). ATEX-compliant version available.
| Biogas | Breweries |
| Building services | Food and beverages |
| HVAC | Heat transfer, Cooling circuits |
| Heating / ventilation / air-condition | Industry engineering |
| Irrigation | Special processes |
| Steam and hot water, district heating | Steel |
| Waste water | Water |
| Water supply | Watertransport |
| Q (50Hz) | 2.0 – 700.0 (m³/h) |
| H (50Hz) | 1.5 – 95.0 (m) |
| Type of bearing | Ball bearings |
| Casing partition | Radially split |
| Drive | Electric motor |
| Drive frequency | 50 Hz |
| Type of drive | Electric motor |
| Connection to power supply | 400 V, 3~ |
| No. of impeller entries | Single entry |
| Impeller material (EN standard) | 1.4408, CC480KK-GS, EN-GJL-250 |
| Type of installation | In-line |
| Type of coupling | Direct |
| Type of lubrication | Grease lubrication |
| Max. permissible fluid temperature | 140.0 (°C) |
| Nozzle position | In-line |
| Maximum operating pressure | PN 16 |
| Pull-out design | Yes |
| Pump set location | Dry installed |
| Shaft material (EN standard) | 1.4571, C45+N |
| Suction characteristics | Non-priming |
| Suitable for drinking water | Yes |
| Type of casing | Volute casing |
| Type of impeller | Closed, Closed / Radial, Multi-vane impeller, Radial |
| Type of connection | Flange |
| UNSPSC classification | 4515150300 |
| Casing material (EN standard) | JL1040, EN-GJL-250 |
| eClass assignment | 36410101, 36410100, 36410000, 36410105 |
| Installation position | Horizontal or vertical |
| Shaft seal type | Mechanical seal |
| Main applications | Building services, Water, Industry and process engineering |
| Casing material | Cast iron |
| Maximum discharge-side pressure | 16.0 (bar) |
| Maximum drive rating | 55.0 (kW) |
| Type of installation | Stationary |
| Maximum speed of rotation | 3000.0 (1/min) |
